| MANUFACTURER: | FB SERIES (NEW OVEN) |
| TYPE: | INERT GAS OVEN, CABINET TYPE |
| SIZE I.D.: | 48"WIDE X 48"LONG X 48"HIGH |
| SIZE O.D.: | 90"W X 72"L X 97"H |
| MODEL: | FB-HT444TULEP480V60KWIG |
| MAXIMUM TEMP.: | 1200 F |
| ELECTRICS: | 480 VOLTS, 60 KW, 3 PHASE |
| CONTROLS: | YOKOGAWA UT55A PROGRAMMABLE TEMPERATURE CONTROLLER AND YOKOGAWA UT150L HIGH LIMIT CONTROL IN A NEMA 1 UL LISTED MOUNTED ON THE RIGHT HAND SIDE OF CHAMBER. |
| GENERAL: | SINGLE SIDE SWING DOOR HELD CLOSED BY POSITIVE CAM LATCHING SYSTEM. STAINLESS STEEL INTERIOR FULLY WELDED AND SEALED TO MINIMIZE GAS LEAKAGE WITH HEAVY GAUGE CARBON STEEL EXTERIOR PAINTED SLATE GRAY. 8" THICK INSULATED WALLS, CEILING AND FLOOR. HEAT IS SUPPLIED BY (30) 2000 WATT INCOLOY SHEATHED HEATING ELEMENTS HOUSED IN A PLENUM. HEATED AIR IS CIRCULATED HORIZONTALLY (RIGHT TO LEFT) BY A 2 HP 2400 CFM 24" DIA. FAN. OVEN WILL BE SET UP FOR INERT ATMOSPHERE AND EQUIPPED WITH SOLENOID VALVE, REGULATOR, GAUGE AND DELIVERY PORT. PRESSURE RELIEF VALVE IS INSTALLED IN CASE THE CHAMBER EXCEEDS THE DESIRED LIMIT. THE OVEN HAS AN AIR JACKET AROUND THE INNER LINER WITH AN INTAKE DAMPER AND FORCED EXHAUST THAT WILL TURN ON DURING COOL DOWN CYCLE. THE DAMPERS ARE MOTORIZED AND ARE OPENED DURING THE COOLING CYCLE & CLOSED DURING HEATING CYCLE. |
| F.O.B.: | FACTORY LOCATION |
| WEIGHT: | |
| TERMS: | 50% DUE WITH PURCHASE ORDER, 50% DUE 5 DAYS BEFORE SHIPMENT. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON THERMS THAT INDEMNIFY US AGAINST ANY LOSS. |
|
081911 |
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS," without express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the goods made by Seller have been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
